During your chimney inspection, your certified technician may have bought your attention to damaged fireplace or furnace flue clay liners. A chimneys flues may be servicing a fireplace, woodstove, pellet stove or other solid fuel appliance, including your furnace or heating system. It may have undergone a chimney fire, or have been connected to an improperly vented appliance, misused woodstove, or exposed to excessive moisture.
Moisture is the by product of high-efficiency furnances, as their name indicates, they extract more heat from a given amount of fuel then conventional furnaces. Less heat is lost up the chimney, however, since less heat is sent up the chimney the tempature in the flue is often below 120 degress. It is only when flue gases drop below this tempature that condensation begins, it literally rains in your chimney! Countless drops of acidic moisture soak the flue. This acidic moisture wreaks havoc on terracotta flues and masonry. Also, if you have an oil burning system, the gases created mix with the moisture and create sulfuric acid. This slowly, over a period of time, destroys the clay liner, especially if your chimney does not have a cap preventing rain and snow from entering your flue liner.
* Cracked or missing flue tiles.
* Eroded brick and mortar.
* Joints between flue tiles not sealed.
* Flue tiles not aligned properly.
* Excessive moisture in gas or oil flues.
* Excessive soot in oil furnances.
* Carbon monoxide leaking into home.
Other reasons a liner is required can be:
* Unlined chimney.
* Upgrading your heating system and the chimney liner does not meet current codes.
* When installing a woodstove/pellet stove or other solid fuel burning appliance.
* Gas appliance where chimney is on the outside of the house. (FPA54 requirements)